NAME
jme —
JMicron JMC25x/JMC26x 10/100/1Gb
Ethernet device
SYNOPSIS
jme* at pci?
jmphy* at mii?
DESCRIPTION
The jme driver supports PCI Express
Ethernet adapters based on the JMicron JMC260 10/100 and JMC250 10/100/1Gb
Ethernet chips. The Ethernet portion of the JMC261 10/100 and JMC251
10/100/1Gb chips, which incorporate a card reader, is also supported.
The jme driver supports IPv4
receive/transmit IP/TCP/UDP checksum offload, IPv6 receive/transmit TCP/UDP
checksum offload and VLAN tag insertion and stripping.
The following media types are supported:
autoselect- Enable autoselection of the media type and options.
10baseT- Set 10Mbps operation.
100baseTX- Set 100Mbps (Fast Ethernet) operation.
1000baseT- Set 1000Mbps (Gigabit Ethernet) operation (some models only).
SEE ALSO
arp(4), ifmedia(4), intro(4), jmphy(4), netintro(4), pci(4), hostname.if(5), ifconfig(8)
HISTORY
The jme device driver first appeared in
OpenBSD 4.5.
AUTHORS
The jme driver was written by
Pyun YongHyeon for FreeBSD
and ported to OpenBSD by Jonathan
Gray
<[email protected]>.