NAME
cas —
Sun Cassini 10/100/1Gb Ethernet
device
SYNOPSIS
cas* at pci?
brgphy* at mii?
gentbi* at mii?
nsgphy* at mii?
DESCRIPTION
The cas driver provides support for
various NICs based on the Sun Cassini/Cassini+ and National Semiconductor
Saturn Ethernet controller chips, including the following:
- Sun GigaSwift Ethernet Adapter (10/100/1000baseT)
- Sun GigaSwift Ethernet MMF Adapter (1000baseSX)
- Sun Quad GigaSwift Ethernet UTP Adapter (10/100/1000baseT)
- Sun Quad GigaSwift PCI-X Adapter (10/100/1000baseT)
- Sun Dual Gigabit Ethernet and Dual SCSI/P Adapter (10/100/1000baseT)
It uses an internal or external PHY or an external 10-bit interface.
The cas driver supports several media
types, which are selected via the
ifconfig(8) command. The supported media types are:
mediaautoselect- Attempt to autoselect the media type (default)
media1000baseTmediaoptfull-duplex- Use 1000baseT on copper, full duplex
media1000baseTmediaopthalf-duplex- Use 1000baseT on copper, half duplex
media1000baseSXmediaoptfull-duplex- Use 1000baseSX on fiber, full duplex
media1000baseSXmediaopthalf-duplex- Use 1000baseSX on fiber, half duplex
media100baseTXmediaoptfull-duplex- Use 100baseTX, full duplex
media100baseTXmediaopthalf-duplex- Use 100baseTX, half duplex
media10baseTmediaoptfull-duplex- Use 10baseT, full duplex
media10baseTmediaopthalf-duplex- Use 10baseT, half duplex
SEE ALSO
arp(4), brgphy(4), gentbi(4), ifmedia(4), inet(4), intro(4), netintro(4), nsgphy(4), hostname.if(5), ifconfig(8)
HISTORY
OpenBSD support for
cas first appeared in OpenBSD
4.1.
AUTHORS
The cas driver was written by
Mark Kettenis
<[email protected]>
based on the gem(4) driver.
BUGS
The cas driver does not yet use many of
the advanced features the Cassini chip offers.