NAME
bse —
Broadcom GENET 10/100/1Gb Ethernet
device
SYNOPSIS
bse* at acpi?
bse* at fdt?
brgphy* at mii?
DESCRIPTION
The bse driver provides support for the
Broadcom GENET controller found on the Raspberry Pi4.
The bse driver supports several media
types, which are selected via the
ifconfig(8) command. The supported media types are:
mediaautoselect- Attempt to autoselect the media type (default)
media1000baseTmediaoptfull-duplex- Use 1000baseT on copper, full duplex
media1000baseTmediaopthalf-duplex- Use 1000baseT on copper, half duplex
media100baseTXmediaoptfull-duplex- Use 100baseTX, full duplex
media100baseTXmediaopthalf-duplex- Use 100baseTX, half duplex
media10baseTmediaoptfull-duplex- Use 10baseT, full duplex
media10baseTmediaopthalf-duplex- Use 10baseT, half duplex
SEE ALSO
arp(4), brgphy(4), ifmedia(4), inet(4), intro(4), netintro(4), hostname.if(5), ifconfig(8)
HISTORY
The bse driver first appeared in
OpenBSD 6.7.
AUTHORS
The bse driver was written by
Jared D. McNeill for NetBSD
and ported to OpenBSD by Mark
Kettenis
<[email protected]>.